|
 |
|
|
|
|
|
|
 BMW R1200RSAPPHIRE BLACK METALLIC / ALPINE WHITE |
            |
Stock No. |
NBX96982 |
|
Year |
2012 |
|
MFG/Model |
BMW R1200R |
|
Color |
Sapphire Black Metallic / Alpine White |
|
Price |
$16,670 |
|
Engine |
Air/oil-cooled flat twin (Boxer) 4-stroke engine, one camshaft and four valves per cylinder, central balancer shaft |
|
Bore X Stroke |
101.0 x 73mm (3.98 x 2.87 in.) |
|
Displacement |
1170cc |
|
Horsepower |
110 bhp @ 7500 rpm |
|
Torque |
88 lb-ft @ 6000 rpm |
|
Compression Ratio |
12.0:1 |
|
Valve Gear |
Chain-driven, high cam, OHV, with adjust |
|
Valves |
2x36mm intake/2x31mm exhaust |
|
Valves per Cylinder |
4 |
|
Engine Mgmt |
Electronic intake pipe injection / BMW-K digital engine management with overrun fuel cut-off, twin-spark ignition |
|
Emission Control |
Closed-loop 3-way catalytic converter, emission standard EU-3 |
|
Maximum Speed |
Over 125 mph (200 km/h) |
|
Fuel consumption
|
57 mpg, at a constant 55 mph |
|
Fuel Requirement |
Unleaded super and premium |
|
Fuel Capacity |
4.75 gallons (18 liters) with 0.8 gallon (3 liters) reserve |
|
Charging System |
Three-phase alternator 600 W |
|
Battery |
12 V / 14 Ah, maintenance free |
|
Cooling System |
Air and thermostatically controlled oil cooling |
|
Primary Drive |
1:1.882 |
|
Clutch |
Single dry plate clutch, hydraulically operated |
|
Gearbox |
Constant-mesh, 6-speed gearbox with helical gear teeth |
|
Gear Ratios |
1st: 2.28:1 2nd: 1.58:1 3rd: 1.26:1 4th: 1.03:1 5th: 0.90:1 6th: 0.81:1 |
|
Final Drive |
Shaft drive |
|
Final Drive Ratio |
2.75:1 | |
Frame |
Two-section frame consisting of front and rear sections with load-bearing engine-gearbox unit |
|
Front Suspension |
BMW Motorrad Telever, stanchion diameter 41 mm, central spring strut |
|
Front Travel |
4.7 inches |
|
Rear Suspension |
Cast aluminum single-sided swing arm with BMW Motorrad Paralever, central spring strut, hydraulically adjustable spring pre-load (continuously variable) at handwheel, adjustable rebound damping |
|
Rear Travel |
5.5 inches |
|
Brake System |
BMW Motorrad Integral ABS (part-integral) Dual front discs, single rear disc |
|
Brakes/Front |
Dual floating discs |
|
Front Rotor |
12.6 inch (320mm) diameter, four-piston fixed calipers |
|
Brakes/Rear |
Single disc |
|
Rear Rotor |
10.4 inch (265mm) single, double-piston floating caliper |
|
Brake Actuation |
Hydraulic, DOT 4 fluid type |
|
Wheel/Front |
Cast aluminum, 3.50 x 17 |
|
Wheel/Rear |
Cast aluminum, 5.50 x 17 |
|
Tire/Front |
120/70 ZR17 tubeless |
|
Tire/Rear |
180/55 ZR17 tubeless |
|
Length |
84.4 inches (2145mm) |
|
Width |
34.3 inches (872mm) |
|
Height |
50.5 inches (1285mm) |
|
Wheelbase |
58.9 inches (1495mm) |
|
Castor |
4.6 inches (119mm) |
|
Seat Height |
Standard seat: 31.5 in. Low seat: 30.3 in. Comfort seat: 31.5 in. High seat: 32.6 in. High comfort seat 32.6 in. Lowered suspension: 29.9 in. |
|
Steering Angle |
62.9 degrees |
|
Dry Weight |
437 lbs. (198 kg) |
|
Wet Weight |
491 lbs. (223 kg) |
|
Maximum Load |
992 lbs. (450 kg) |
|
Payload |
500 lbs. (227 kg) |
